Introduction to Hing Wah Honeycomb Aluminum Plate

Hing Wah Honeycomb Aluminum Plate is formed with hexagon aluminum honeycomb making up of alnico with rigidity H19, as the core of interlayer adhering to the faceplate and the soleplate to endure the pressure. These diversionary and compressing honeycombs are like girders to dispersive bear the pressure coming from the plates, that providing the high level off tolarence when the plates are very large. Moreover, hollow honeycomb also can weaken the heat dilatability of the plates.

Hing Wah Aluminum Honeycomb Plate was officially produced after passing the test of complex material held by CIBA and appraisal by the authoritative science institutes in Guangdong and Shanghai. As the new generation of the building material, the density less than 600 kilograms per square meters, first eight of glass curtain wall; 22mm-thick-standard plate can be loaded 700 kilograms when length to 1 meter, flexibility to 10mm, Hing Wah Aluminum Honeycomb Plate can be widely used for building curtain wall, roofing, large size signboard and inner wall after its surface was treated with high-tolerance-caustic of florin carbon resin.

Hing Wah Aluminum Honeycomb Plate’s production procedure adopted back complex composition equipped with large span digital controlling machines and testing instruments to ensure avoiding overlapping processing when the products sending to the sites, that much lower the cost of personnel and material resources.
　　
Hing Wah Aluminum Honeycomb Plate was appraised as convinced product by Shanghai Building Material Industry Committee and was recommended as environmental conservation product by Shanghai Green Building Material Exhibition Center. Our plate gained widely consistent affirmation and recommendation by owners and architects.